Bathroom Stall Latch Repair Kit. For 1" Round-Edged Inswing Doors.
Fix any damaged toilet partition latch. Universal
THIS FIX - IT KIT IS DESIGNED FOR 1" ROUND-EDGED INSWING DOORS.
The Kit consists of:
- U-Shaped Stainless Steel round-edged sleeve that bolts over and covers concealed latch of the bathroom stall door.
- 4” high x 3-5/8” wide face.
- Fits around 1” thick round-edged door
- Pre-drilled holes for latch: 2-3/4” on centers
- Throw Latch. Chrome plated zamac, 2 3/4" hole centers (see our #90L60) that bolts onto the U-Shaped sleeve.
- Hole Spacing: 2-3/4".
- Overall Plate Height: 4".
- Latch projects 1-9/16" from door (door to tip of knob).
- Latch Bolt: 3-3/16" long x 3/4" wide x 3/16" thick.
- Slide Distance: 15/16”
- Latch Bolt Clearance: 9/16" from door to underside of bolt.
- Strike. Chrome plated zamac, 1 1/2" hole centers. (See our #90S38)
- Hole centers: 1-1/2”
- Height: 2-1/2”
- Overall width: 1-7/8”
- Keeper. Chrome plated zamac, 1 1/2" hole centers. (See our #90S140)
- Hole centers: 1-1/2”
- Height: 2-1/2”
- Width, Mounted Arm: 1-3/16”
- Width: Slot Arm: 7/8”
- Slots for latch bar are 1/4” wide x 13/16” high
- Spacer Plate. Aluminum. 1 1/2" hole centers.
- 2-3/16” high x 7/8” wide x 1/16” thick
- Mounting Hardware.
- 2 pcs 8-32 x 1-1/8” oval 6-lobe screw (T-20)
- 2 pcs 8-32 x 1” oval 6-lobe screw (t-20)
- 4 pcs unslotted barrel nut 8-32 x 1/2"
- 2 pcs 10-24 x 1-3/16” 6-lobe shoulder screw (T-27)
- 2 pcs 10-24 x 5/8” 6-lobe barrel nut (T-27)
- 2 pcs #8 finishing washer
- T-20 6-lobe driver
- T-27 6-lobe driver
- Instructions.
Also known as 111680 and 9A1116